Evaluation of the Physicochemical Properties of Wheat and Potato Flour Used in Bread Making

Authors

  • ياسر قرحيلي قسم تقانة الأغذية _كلية الهندسة التقنية _جامعة طرطوس
  • فادي درويش قسم تقانة الأغذية _كلية الهندسة التقنية _جامعة طرطوس
  • زهره يحي عبد الرحمن قسم تقانة الأغذية _كلية الهندسة التقنية _جامعة طرطوس

Keywords:

Physicochemical properties, Wheat flour extraction rate, Potato flour, flour quality, Falling Number.

Abstract

This study was conducted in the laboratories of the Technical Engineering College during 2025 and aimed to investigate and evaluate the physicochemical properties of four types of flour. Three wheat flours with different extraction rates (72%, 82%, and 92%) and granular potato flour were used, with wheat flour at an extraction rate of 82% adopted as the control sample, as it is the flour commonly used in the production of subsidized bread, in order to determine the effect of extraction rate and raw material type on the quality of flour used in bread production.

Chemical analyses were carried out to determine moisture, ash, and acidity contents, in addition to evaluating certain physical properties, including wet gluten content, particle size distribution, and color. The Falling Number was also determined to evaluate the diastatic enzymatic activity of the flour samples under investigation.

The results showed a decrease in moisture content (from 13.81 to 13.350%), an increase in ash content (from 0.70 to 1.030%), an increase in acidity (from 2 to 2.60), and an increase in protein content (from 10.164 to 12.255%), as well as an increase in color value (from 4.6 to 12) with increasing wheat flour extraction rates from 72% to 92%.

The results also indicated an increase in particle size (from to  ) and wet gluten content (from 20.3 to 26%) with increasing extraction rate from 72% to 92%.

Moreover, the Falling Number decreased from 280 to 254.33 seconds with increasing extraction rate from 72% to 92%.In contrast, potato flour was characterized by lower protein content (5.930% compared to 11.120% for the control sample), lower moisture content (7.980% compared to 13.309%), higher acidity (4 compared to 2.30 in the control sample), and higher ash content (2.77% compared to 0.860%). Moreover, potato flour was free of gluten (0 compared to 23 in the control sample), exhibited a relatively lighter color (4 compared to 8.4 in the control sample), and showed a higher particle size distribution compared to the control sample د (,and recorded a higher Falling Number(295.33  compared to 266 seconds for the control sample).

These results confirm the importance of extraction rate in determining flour quality and its potential application in improving composite flour formulations used in bread making.

Downloads

Published

2026-10-29