Design and Performance Analysis of a Hybrid Optical Amplifier Based on The Runge –Kutta Algorithm

Authors

  • نغم عباس قسم هندسة الاتصالات -كلية الهندسة الميكانيكية والكهربائية والالكترونيات-جامعة اللاذقية-اللاذقية- سورية.

Keywords:

Raman Amplifier, Erbium Shaped Amplifier, Attenuation, Gile-Desurvire Model, Runge-Kutta Algorithm.

Abstract

In wavelength division multiplexing systems, optical signals experience a decrease in intensity when traveling long distances within the optical fiber due to significant losses caused by attenuation and dispersion. Therefore, to reduce these attenuation losses, pure optical amplifiers such as raman amplifiers and  erbium doped fiber amplifiers have been used. Hybrid optical amplifier have also emerged as a promising technology contribute to increasing the transmission bandwidth and improving gain. But optical noise resulting from amplified spontaneous emission limits the number of amplifers and amount of amplification, therefore, in this research, new configurations of a hybrid optical amplifier comprising of two amplifiers (RAMAN-Erbium doped fiber amplifier) were simulated and tasted to achieve higher gain and lower noise figures, using the same amplifier length and pump power, depending on the Runge–Kutta algorithm as a numerical method used to solve the Giles–Desurvire model which represents the behavior of the erbium doped fiber amplifier, using MATLAB software, additionally, the RAMAN amplifier was modeled using the coupled wave equations that describe its behavior, implemented in MATLAB.

The results of these study have enabled the determination of the optimal connection method for the amplifiers, the best pumping direction, and the basic design parameters for optical amplifiers that achieve the best performance. 

Published

2026-10-29