Numerical Investigation of the Effect of Reynolds Number, Heat Transfer and Fluid Flow in Converging Tubes on Thermal Boundary Layer Growth in Using CFD

Authors

  • مي سعيد قسم هندسة القوى الميكانيكية - كلية الهندسة الميكانيكية والكهربائية- جامعة اللاذقية – اللاذقية – سوريا.

Keywords:

Thermal Boundary Layer, CFD, Heat Transfer, Inclination Angle, Reynolds Number.

Abstract

This study aims to analyze the effect of temperature and tube inclination angle on the thermal boundary layer growth in converging tubes using computational fluid dynamics (CFD) and the ANSYS FLUENT 2021R1 software, the growth and formation of the thermal boundary layer near the pipe walls was studied under varying fluid temperature, different Reynolds number values, ​​and different inclination angles, then we searched the impact of each of the above factors on the thermal boundary layer thickness, in order to select the optimal converging pipe design at which the maximum speed is achieved at the exit section.

  The results showed that the thermal boundary layer thickness starts at a maximum value at the inlet cross-section of the pipe, then gradually decreases towards its outlet, the results also show a decrease in the thermal boundary layer thickness with a decrease in the inclination angle of the nozzle, as it decreases by 11.44% when the angle of inclination decreases within the range (84°-68°), it was also noted that the effect of temperature on the thermal boundary layer thickness is less than the effect of changing flow velocity inside the pipe, as it was found that the thermal boundary layer thickness decreases by 12.033% when the air temperature decreases within the range (95-35)°C, and that the thermal boundary layer thickness increases by 100.5% when the flow velocity decreases and consequently the Reynolds number decreases within the range (9.2*105-4*104).

Downloads

Published

2026-10-29