Evaluation of the performance of the modified chisel plow comparison with the Moldboard plow on some technical indicators of the tillage unit

Authors

  • ربيع ابراهيم قسم المكننة الزراعية- كلية الهندسة التقنية – جامعة طرطوس – طرطوس – سوريا.

Keywords:

Modified Chisel Plow, Moldboard plow, Practical productivity, Volume of soil raised, tensile strength, Field efficiency.

Abstract

The research was conducted in one of the fields of Samarian village in Al-Safsafa area of Tartous Governorate in the fourth month of 2024, with the aim of  Evaluation of the performance of the modified chisel plow comparison with the Moldboard plow on some technical indicators of the tillage unit. The experiment used a three-hull Moldboard plow and a three-hull chisel plow modified by installing fins on the stalk, and the performance was evaluated according to the following indicators: soil inverting, Practical productivity, Volume of soil raised,  tensile strength, Field efficiency .The theoretical working speed was set at 3.74 km/h, and the ploughing depth was set at      (30cm). The results showed the following:

The modified chisel plow outperformed by achieving the highest rate of practical productivity, which amounted to (0.330 ha/h), while it amounted to (0.236 ha/h) for the moldboard plow.The modified chisel plow also gave the highest rate of Volume  soil raised, reaching ( /h), while it reached (684.33 /h) for the moldboard plow.While The modified chisel achieved the lowest rate of tensile strength, which amounted to (1.809kN), while it amounted to (1.811kN) for the moldboard plow. The modified chisel plow outperformed the moldboard plow by achieving the highest rate of field efficiency, which amounted to (89.66%), while it amounted to (87.72%) for the moldboard plow. Therefore, the modified chisel plow is considered more economical than the moldboard plow, because it achieves a higher rate of practical productivity and field efficiency, and contributes to soil inverting degree and mixing its components at a higher rate than the moldboard plow. It also reduces the tensile strength, which contributes to reducing the rate of fuel consumption.

Downloads

Published

2026-10-29